Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Lomita, CA | Glendale Lock & Key
Medeco locksmith service in Lomita means rekeying, repairing, and replacing high-security cylinders on aging ranch homes, tight side entries, and PCH storefronts that have spent decades in salt air. We’re an independent Medeco service provider covering all of 90717, and the work here concentrates on retrofit doors, corroded hardware, and lost restricted keys. If you need a Medeco cylinder rebuilt, rekeyed, or a lost m3 key decoded and replaced, call (855) 791-2710.
Why Lomita Residents Choose Us for Medeco Service
Most locksmiths in the South Bay will happily swap a Kwikset knob or cut a Schlage key. Few of them stock Medeco OEM pin kits, biaxial tumblers, or m3 key blanks. We do. That matters in Lomita because so much of the housing stock dates to the 1940s through 1960s, and a lot of those doors have been retrofit over the years with whatever hardware was on hand. When a Medeco Maxum deadbolt finally starts binding on a door that was never cut square for it, we don’t hand the job off. We open the cylinder, read the pin stack, and fix it properly. Noel Tarkanian, our owner and lead technician, trained through the locksmithing program at Glendale Community College and has spent years working on residential and commercial hardware across the South Bay. He can tell you in thirty seconds whether your Biaxial cylinder has a galled sidebar or just a tired spring, and he’ll explain the repair in plain English before any work begins. For full details on what we carry and service, see Medeco sales & service.
Styles & brands we work with
Common Medeco Locksmith Problems We Solve in Lomita
- Seized or gritty Medeco Maxum deadbolts on PCH storefronts. The marine layer rolls in off San Pedro Bay and the salt air works its way into the plug. Tumblers pit, springs weaken, and the key starts fighting you. We strip the cylinder, clean or replace the internals with OEM parts, and get the bolt throwing smoothly again.
- Worn slider pins and galled sidebars in older Biaxial cylinders. Lomita’s ranch and cottage homes often have entry doors that have hung for sixty years. The Biaxial cylinders on those doors develop wear patterns that cause keys to bind even when the cuts look fine. That’s a cylinder rebuild, not a door problem, and it’s exactly the kind of repair most locksmiths misdiagnose.
- Strike-plate misalignment on post-WWII cottage doors. Frame sag is everywhere on older Lomita homes. When the frame drops a quarter inch, the Medeco bolt loads off-axis and chews the bolt face or the cylinder cam. Rekeying alone won’t fix it. We realign the strike, reinforce where needed, and then set the cylinder.
- Lost or misplaced m3 restricted keys. Medeco’s restricted key control means you can’t just walk into any hardware store and get a copy. That’s the point of the system. But when Lomita homeowners lose their only key on a tight side door or gate lock, they need a technician who can decode the lock and cut OEM blanks from the proper keyway.
- Retrofit-cut doors with improperly seated mortise pockets. Many Lomita doors were originally cut for simple knob locks or older deadbolts. When a Medeco Maxum goes in later, the pocket often isn’t deep enough or square enough. The bolt binds, the cylinder cants, and the hardware wears prematurely. We address the door prep as part of the service.
Medeco Service in Lomita: What Local Conditions Mean for Your Equipment
Lomita is unusual for a locksmith because the whole city is barely one square mile, landlocked and hemmed in by Torrance on one side, Carson on another, and San Pedro pressing in from the south. There is no sprawl here, no new-construction tract to keep a master-key crew busy. What’s here is older single-family housing, mostly California ranch and cottage styles built in the ’40s, ’50s, and ’60s, wrapped around a Pacific Coast Highway commercial strip. For Medeco owners, that geography changes how service actually works. The tech who rekeys a Medeco cylinder on a PCH storefront at ten in the morning is the same tech who can be at a 1950s cottage two blocks over by ten-thirty, or handling Medeco in Manhattan Beach by eleven. Density like that means turnaround is measured in hours, not appointment windows days out. It also means we see consistent patterns. Salt air corrosion near the coast, narrow lots where side and rear doors sit tight against fences and carports, and decades-old doors that were never prepped for modern high-security hardware. Those three things explain almost every Medeco service call we run in 90717.
Medeco Models & Products We Service in Lomita
We service the Medeco Maxum deadbolt and the Maxum 11TR commercial-grade series on storefronts and side entries, plus Biaxial, Biaxial Plus, and m3/m3+ keyway cylinders on older doors and gates throughout Lomita. Our bench stocks Medeco OEM key blanks, pin kits, and sidebar springs, which means we can rebuild a high-security cylinder locally instead of shipping it off and leaving your door offline. We use OEM parts on the cylinder itself, the part that actually protects the key control, and only turn to quality aftermarket hardware for the surrounding lockset like strikes, faceplates, or door reinforcement plates. If a Medeco cylinder is galled beyond a clean rebuild, we’ll tell you straight and quote a replacement rather than patching it again. For our broader coverage area, see Lomita service area.
Medeco Service Pricing in Lomita
Medeco work in Lomita typically falls into three ranges. A standard rekey or cylinder rebuild runs roughly $35 to $85 per cylinder, depending on whether we’re working with OEM m3 pins or doing a full strip-and-clean. Replacing a worn Medeco Maxum or Maxum 11TR deadbolt with new hardware usually lands between $95 and $210 per lockset, including installation and fresh restricted keys. For a lost m3 key where we need to decode and originate from OEM blanks, expect $50 to $120 per key. Door reinforcement, strike realignment, and pocket prep are quoted separately after we see the condition of the door. When you call (855) 791-2710, we’ll quote the full price over the phone before anyone is dispatched. That’s the price on the invoice. No call-out surcharge gets added when the tech arrives.
Serving Lomita, CA — Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Lomita
Yes, we can rekey a Medeco Maxum in place as long as the cylinder isn’t internally galled or damaged, and on old cottage doors that usually means a rekey plus a strike plate realignment so the bolt stops binding. We’ll open the cylinder, replace the tumblers with OEM pins, and cut fresh keys on the spot. If the cylinder can’t be rebuilt cleanly, we’ll tell you before touching anything. Call (855) 791-2710 for an exact quote.
On PCH storefronts in Lomita it’s usually both, and the salt air is the trigger. The cylinder plug and tumblers pit from corrosion, while the aluminum storefront frame flexes slightly and shifts the strike plate. We rebuild the cylinder with OEM parts first, then check the strike and bolt alignment. About half the time the cylinder just needed a proper clean and repin after everyone else kept spraying lubricant into it and making it worse.
Yes. We decode the cylinder and originate a new m3 key from OEM-restricted blanks. That’s exactly what Medeco’s key control is designed for: nobody can just copy your key at a corner shop, but a trained technician with the right keyway and decoding equipment can reconstruct the cuts and get you back in. The cost depends on how many keys you need. Call (855) 791-2710 and we’ll quote it over the phone.
It does, and it’s one of the things we address most often. The marine layer that sits over Lomita and the surrounding South Bay pushes salt-laden moisture into exterior hardware. Medeco cylinders are built with tighter tolerances than consumer-grade locks, which makes them more sensitive to pitted pins and sticky tumblers once corrosion starts. The good news is a proper clean and repin with OEM parts almost always restores them.
Yes, and this is a job we handle regularly on the narrow lots throughout Lomita. Side and rear doors on these post-war homes often sit inches from a fence or carport wall, so the entire security of that entry depends on the deadbolt and strike holding. We reinforce the door edge, replace the strike with a heavy-duty version anchored into the frame, and confirm the Medeco bolt throws without binding. Call (855) 791-2710 for a free estimate on any Medeco reinforcement work.
Service Areas Near Lomita
We serve Lomita and the surrounding South Bay communities, including Torrance, Harbor City, Wilmington, and San Pedro. For Medeco clients on the Palos Verdes peninsula, see Medeco service in Palos Verdes Estates. For areas across the border, see Medeco service in Rolling Hills Estates.
Book Your Medeco Service in Lomita Today
Same-day Medeco rekey and repair is available throughout Lomita, and our techs are already working the PCH corridor and the residential streets behind it. We also offer Car Key Replacement in Lomita for all makes and models. Call (855) 791-2710 for a free estimate, quoted before dispatch, and the price we quote is the price you pay.
Written by Noel Tarkanian, Owner at Glendale Lock & Key, serving Lomita since the company’s founding. The right hardware, fitted right – that’s all security actually is.