Kwikset Locksmith Service Nationwide | Glendale Lock & Key

Why Glendale Homeowners Choose Kwikset Locksmith

We provide independent Kwikset repair in Glendale, covering everything from SmartKey cylinder rebuilds to Kevo and SmartCode keypad repairs. What separates our Kwikset work from a general handyman is simple: we have torn down and rebuilt enough of these locks around Glendale to know exactly which pin stacks, slider racks, and circuit boards fail and why. We service Kwikset hardware as an independent provider, not a Kwikset dealer or authorized shop. That means we work for you, not a warranty department. If you have a Kwikset lock that will not turn, re-key, or respond, call us at (855) 791-2710 and we will tell you what is actually wrong before anyone rolls a truck.

Call (855) 791-2710

Why Trust Glendale Lock & Key for Your Kwikset Locksmith?

Noel Tarkanian, our lead technician, grew up in the Verdugo Woodlands neighborhood watching his uncle rekey apartment units. That early exposure to pin-tumbler mechanics became a career: he trained through the locksmithing and security technology coursework at Glendale Community College and spent years on residential and commercial hardware across the Glendale and Kwikset repair in La Cañada Flintridge corridor before founding Glendale Lock & Key. What does that mean for a Kwikset owner? It means we know what a SmartKey re-key lever should feel like when the slider rack is healthy versus when grit has scored the wafers. It means we can hear a 913 keypad motor laboring and know whether the issue is voltage, alignment, or a failing board. “The right hardware, fitted right, that’s all security actually is.” That is the standard we work to on every Kwikset job in Glendale.

We also carry genuine Kwikset SmartKey cylinders, keypads, and turn assemblies, so a re-key or electronic swap matches factory tolerances instead of forcing an aftermarket part that binds after a month. For warranty-sensitive work, we stay with OEM-compatible components. For structural weak points like Grade-3 strikes on old Glendale doors, we upgrade to quality aftermarket reinforcement hardware where the original Kwikset part was never designed to hold up to a sagging jamb.

Common Kwikset Locksmith Problems We Fix in Glendale

Kwikset makes the most common residential lock in America, and Glendale homes have thousands of them. Here are the five failure modes we see most often when a homeowner calls us about a Kwikset:

• SmartKey cylinders that stop re-keying. The Kwikset 660 and 665 deadbolts and entry knobs use the SmartKey re-key lever system. After years of use, dust and grit work into the slider rack that positions the wafer stack. The key goes in but the plug will not rotate, or the re-key tool will not slot cleanly. We clear and lubricate the rack when possible and replace the cylinder when the rack is scored beyond serviceable tolerances.
• Kevo 2nd Gen Bluetooth drops and dead keypads. The Kevo uses a smartphone app and a fob for touch-to-open. After a battery leak or a firmware dropout, the module stops pairing and the lock defaults to manual key operation. We see this often enough that we keep replacement modules and fresh wiring harnesses on hand. Sometimes a full disassembly and contact cleaning resolves it; sometimes the board is gone and a Kevo swap is the honest call.
• Grade-3 deadbolt strikes that misalign seasonally. Glendale’s hot, dry summers and Santa Ana winds cause wooden doors and jambs to swell and shrink. On older Spanish Colonial and Craftsman homes, that seasonal movement pulls the strike plate a few millimeters out of alignment and the bolt drags or will not fully throw. We re-align and reinforce the strike rather than forcing the deadbolt, which just wears out the cylinder.
• Loose or stripped turn-button assemblies. On frequently used entry doors, the interior thumbturn on a Kwikset deadbolt eventually loosens or the retaining screw strips out of the chassis. The deadbolt still locks, but the turn feels vague and eventually fails to retract the bolt from inside. We rebuild the turn assembly or swap in a new one before it strands you outside your own front door.
• SmartCode 913 and 914 keypads that go dark or keep working intermittently. The 913 is a keypad deadbolt with a motorized bolt; the 914 adds a lever. Battery leakage corrodes the terminal springs and the keypad board loses continuity. We replace the board or the chassis, then re-key to existing Kwikset keys so the homeowner does not have to change every key on the house.

Kwikset Parts & Our Repair-vs-Replace Approach

We stock genuine Kwikset SmartKey cylinders, keypads, and turn assemblies locally so we can resolve most Glendale calls in one visit without waiting on a mail-order part. We use quality aftermarket strikes and reinforcement hardware where the Kwikset original was the weak point, particularly on aging wood doors with shifting jambs. The decision to repair or replace comes down to the condition of the mechanism, not the age of the lock. A tired Kwikset knobset will usually get a re-key and re-tensioning before we suggest a replacement; a cracked SmartKey rack or a dead keypad board is a replacement, because no amount of adjustment brings a failed circuit or a fractured rack back to reliable operation. We will always show you the worn part and explain the cost before doing the work. Call (855) 791-2710 and we will walk you through what we are seeing.

Our Kwikset Service Process – Step by Step

1. 1
   Diagnosis. We identify the exact Kwikset model and series, then test the cylinder, turn assembly, bolt alignment, and electronics in sequence until we isolate the failure. A SmartKey that will not re-key is a different fix than a SmartKey that will not turn, and the price difference matters.
2. 2
   Repair or install. We explain what we find in plain terms and quote the full price before any work begins. If it is a repair, we use OEM-compatible Kwikset parts where fit matters and upgraded aftermarket hardware where the original was under-specified for the door.
3. 3
   Test cycle. We operate the lock repeatedly under hand pressure, including the throw and retract cycle on the deadbolt and the re-key function on SmartKey models. For electronic locks, we verify the keypad, app pairing, and manual key override all work before we leave.
4. 4
   Warranty and follow-up. Our workmanship is covered, and we stand behind the parts we install. If something shifts on a Glendale wood door a season later, call us. We would rather adjust a strike than let a small misalignment destroy a new cylinder.

Kwikset Products We Service & Install in Glendale

We work on the full Kwikset line that Glendale homeowners actually own. The SmartKey 660 and 665 deadbolts and entry knobs are the most common, and we service both the re-key mechanism and the mechanical chassis. We install and repair the Kevo 2nd Gen Bluetooth smart lock, plus the SmartCode 913 and 914 keypad deadbolts and levers, and we also offer Kwikset in Burbank. We also handle the Halifax handlesets and contemporary entry locksets that show up on newer Glendale remodels and condos. If you have a Kwikset model not listed here, ask us. We likely have the part or can source it same-week.

We Also Service These Brands

We work on Kwikset every week, but we are not a one-brand shop. Glendale Lock & Key services Schlage and Medeco hardware as well, across residential and light-commercial applications. The same technician who rebuilds a SmartKey cylinder can rekey a Medeco and install a Schlage B60N. That range matters when one house has three different brands on four doors.

FAQs – Kwikset Locksmith Service in Glendale

Is Glendale Lock & Key authorized by Kwikset?
No. We are an independent Kwikset service provider, which means we are not bound by a dealer agreement that pushes replacement over repair. We work on Kwikset hardware because it is what Glendale homeowners have on their doors, and we know it inside and out. Being independent means we give you the honest diagnosis, not a warranty-department script.

Do you use genuine Kwikset or OEM parts?
Yes, for the parts where fit and function depend on factory tolerances: SmartKey cylinders, keypads, turn assemblies, and electronic chassis. For strikes and reinforcement hardware on older Glendale doors, we often use quality aftermarket parts because the Kwikset original was a Grade-3 component that was never designed to handle seasonal jamb movement.

How long does Kwikset service take?
Most Kwikset rekeys and cylinder rebuilds take 20 to 40 minutes once we are on site. SmartCode or Kevo swaps take a little longer because we test the electronics, app pairing, and manual key override before we leave. Call (855) 791-2710 for a time estimate on your specific model.

What Kwikset models and series do you cover?
We service the SmartKey 660 and 665 deadbolts and entry knobs, the Kevo 2nd Gen Bluetooth lock, the SmartCode 913 and 914, and Halifax handlesets. We also work on older Kwikset mechanical deadbolts and knob locks that predate the SmartKey line. If you are not sure what model you have, describe the key and we can usually identify it.

Will service void my Kwikset warranty?
Any third-party service carries some warranty risk, which is why we use genuine Kwikset components for cylinder and electronic work. We follow factory torque and fitment standards, and we document what we install. If a warranty claim is possible, we will tell you upfront and recommend the path that protects your coverage. For our part, we stand behind our workmanship regardless of manufacturer warranty status.

How much does Kwikset locksmith cost in Glendale?
A Kwikset rekey typically runs between $85 and $145 depending on the number of cylinders. A SmartKey cylinder repair or replacement usually lands between $120 and $220. SmartCode or Kevo board and chassis swaps run higher, generally $180 to $350 with parts. The full price is quoted on the phone before anyone is dispatched, and that is the price on the invoice. No call-out surcharge gets added on arrival. Call (855) 791-2710 for an exact quote, estimates are free.

Book Your Kwikset Service in Glendale, CA

Call (855) 791-2710 and tell us what your Kwikset lock is doing, or not doing. We will give you a straight answer and a firm price before we dispatch. Whether it is a SmartKey that will not re-key, a dead keypad on a 913, or a deadbolt that drags every summer, we also handle Kwikset repair in Echo Park and will fix it right.

Written by Noel Tarkanian, Owner at Glendale Lock & Key, serving Glendale since the company’s founding.