Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Pasadena, CA | Glendale Lock & Key
We provide independent Schlage locksmith service across Pasadena, from rekeys and deadbolt installs to Encode smart lock repairs. What makes our Schlage work different here is simple: Pasadena’s century-old doors warp and shift, and we service the lock to fit the door rather than forcing the door to fit a new lock. Call (855) 791-2710 for a straight answer on your Schlage hardware.
Why Pasadena Residents Choose Us for Schlage Service
Glendale Lock & Key is an independent Schlage service provider, not a manufacturer affiliate. That independence matters in Pasadena and nearby areas like San Marino Schlage service, where the right fix is often a rekey rather than a replacement. We’re trained across eight lock brands spanning consumer, commercial, and high-security tiers: Schlage, Kwikset, Medeco, Yale, Baldwin, Mul-T-Lock, Sargent, and Abloy. That breadth means we recognize a Schlage B60 tailpiece issue from across the room, but we also know when a period mortise lock on a Bungalow Heaven door should stay untouched.
Noel Tarkanian, our owner, grew up watching his uncle rekey apartment units and fell hard for the mechanical logic inside a pin-tumbler cylinder. He says the right hardware, fitted right, is all security actually is. That’s the standard we bring to every Schlage lock we touch in Pasadena.
We use genuine Schlage OEM cylinders, tailpieces, and strike plates for matching fit and finish. Aftermarket parts only show up for cosmetic trim, where the OEM equivalent isn’t available or doesn’t make sense. The full price is quoted on the phone before anyone is dispatched. That quoted figure is the price on the invoice. No call-out surcharge added on arrival.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Pasadena
- B60-series deadbolts that won’t throw fully. The tailpiece and thumbturn spindle on a Schlage B60 wear and bind after years. In Pasadena’s hot, dry summers and Santa Ana wind episodes, original solid wood doors warp just enough that the bolt drags against the strike plate. We rekey the OEM cylinder and reset the strike and hinges so the bolt seats cleanly, without drilling out period hardware.
- F-Series knobs and levers that sag, grind, or lock up. On 1900s – 1930s Craftsman bungalows, original doors rarely match the modern 2-3/8 or 2-3/4 Schlage backset, so the interior roses loosen and trim sags. We realign the chassis, tighten the mounting posts, and when the original boring is badly off-center, we re-bore cleanly and patch behind the rose plate.
- Schlage Encode and Camelot smart deadbolts that jam in late summer. Pasadena’s dry heat swells wood doors seasonally. When the frame shifts, the motorized bolt binds, stalls, and drains batteries. We address the door alignment first, then calibrate the bolt throw so the motor isn’t fighting the jamb every cycle.
- Gritty, worn Schlage cylinders on bungalow court apartment doors. Pasadena’s bungalow courts were built for density, and many multi-unit doors still run original Schlage cylinders that haven’t been serviced in decades. Dusty summer conditions turn old pin springs gritty, and keys stick or snap. We disassemble, clean, re-pin, and re-spring the cylinder when it’s sound, and replace only the housing or bolt when it’s genuinely worn through.
- Schlage deadbolts on doors already patched around prior hardware. Bungalow court and Craftsman doors often show layered repair work from earlier locks. When a Schlage deadbolt sits in off-center boring, the bolt throws at an angle and eventually binds. We reset the boring with a jig, install the OEM strike, and leave the surrounding wood intact.
Schlage Service in Pasadena: What Local Conditions Mean for Your Equipment
One thing keeps recurring in our Pasadena Schlage service calls: the original boring. Pasadena’s bungalow courts and 1900s – 1930s Craftsman bungalows mean many multi-unit doors still carry original solid wood surrounds that previous owners or handymen already patched around Schlage hardware. That means a rekey or swap often contends with prior, off-center boring rather than a clean factory cutout. On a Craftsman-era street off Orange Grove, a homeowner’s Schlage B60 deadbolt had stopped throwing fully as the dry summer warped her original wood door and dragged the bolt against the strike — the kind of East Pasadena Schlage service call we handle regularly. Instead of upsizing the hole, our tech rekeyed the OEM Schlage cylinder to her new keys and reset the strike and hinges so the bolt seated cleanly again. Nothing period was drilled out, and the door latched smoothly by the end of the visit.
In the historic neighborhoods around Orange Grove and the Craftsman-era streets, a careless drill can ruin irreplaceable period hardware. So we lean on non-destructive entry and rekeying whenever the cylinder is still sound. For Pasadena specifically, that’s not just preference; it’s the only respectful way to work on a door that’s older than most locksmith companies.
Schlage Models & Products We Service in Pasadena
We service the Schlage lines most common in Pasadena homes and small commercial suites:
- B60/B62 single-cylinder deadbolts – the workhorse on Craftsman and mid-century doors.
- F-Series (F51/F58) keyed knobs and levers – common interior and entry hardware.
- Schlage Encode and Camelot electronic deadbolts – smart and keypad models with motorized bolts.
- Schlage ND-Series cylindrical locks – commercial-grade hardware found in older Pasadena office buildings and institutional corridors.
We carry a working stock of genuine Schlage OEM cylinders, tailpieces, springs, and strike plates for these lines, so most Pasadena service calls finish in one visit. On period doors with ornately bored mortise prep, we’re honest that rekeying or re-springing a sound Schlage cylinder usually beats replacing it. We replace only when the housing or bolt is worn through.
Schlage Service Pricing in Pasadena
What drives cost on a Schlage job in Pasadena is straightforward: whether the cylinder gets rekeyed, the deadbolt gets replaced, or the door itself needs realignment. A standard rekey typically runs lower than a full hardware swap because we keep the housing and tailpiece. Deadbolt installation costs more when the door needs re-boring, patching, or a new strike alignment. Smart lock service adds calibration time and any necessary Wi-Fi or bridge troubleshooting.
The full price is quoted on the phone before we dispatch. That’s the price on the invoice, with no arrival surcharge. Call (855) 791-2710 and we’ll walk through your Schlage model and door condition, then give you an exact number.
Serving Pasadena, CA — Our Local Coverage Area
We’re based in the Pasadena area and know this community well, from South Pasadena Schlage service to nearby neighborhoods. Use the map below to see our full coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Pasadena
Yes, in most cases. If the Schlage cylinder housing, bolt, and tailpiece are still mechanically sound, we rekey the existing OEM cylinder with new pins and keys and leave the original hardware in place. We only recommend replacement when the housing or bolt shows structural wear that rekeying can’t correct. Call (855) 791-2710 and we’ll tell you honestly which camp your lock falls into.
The door is swelling. Pasadena’s hot, dry summers and Santa Ana winds warp solid wood doors enough that the motorized bolt binds against the strike. The lock’s motor then stalls, drains batteries, and reports a jam. We realign the door and strike first, then calibrate the bolt throw so the motor cycles cleanly. Call (855) 791-2710 for a service visit before the issue damages the motor.
We do. The Schlage ND-Series is commercial-grade cylindrical hardware common in older Pasadena office buildings and institutional corridors. We service, rekey, and replace ND-Series locksets using OEM Schlage cylinders and trim. If you’re managing a multi-door property, we can scope the work in writing with a flat per-lock price.
Not the way we do it. On a century-old Pasadena door with original mortise prep, we assess whether the door can accept a surface-mounted Schlage deadbolt without destroying the surrounding wood. If the mortise body is still functional, rekeying that lock is usually the better move. If the door already has patched boring from prior Schlage hardware, we re-bore with a jig and keep the period trim intact.
Usually yes. The F-Series chassis loosens when the door’s original boring doesn’t match the Schlage backset, and the roses and trim sag. We tighten the mounting posts, realign the chassis, and shim the rose plate as needed. If the spindle is worn, we replace it with an OEM Schlage part. Call (855) 791-2710 and we’ll set a Pasadena service window.
Service Areas Near Pasadena
We serve Pasadena directly and cover the surrounding corridor, including Glendale, Silver Lake, Burbank, Echo Park, Hollywood, and La Cañada Flintridge. If your Schlage hardware sits across the 134 or the 210, we’ll still make the drive. See our Pasadena service area page for full coverage. For Schlage work specifically in neighboring neighborhoods, see Schlage service in Koreatown and Schlage service in West Hollywood. For the full brand picture, visit our Schlage sales & service page.
Book Your Schlage Service in Pasadena Today
From the ignition to the deadbolt, we’re the shop that actually knows the hardware. Call (855) 791-2710 and tell us what your Schlage lock is doing. We’ll give you a straight diagnosis and a firm price before anyone heads to Pasadena. Same-day service is available when the schedule allows.
Written by Noel Tarkanian, Owner at Glendale Lock & Key, serving Pasadena and the surrounding corridor.