Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Fontana, CA | Glendale Lock & Key
We provide independent Kwikset locksmith service across Fontana, from the 1950s tract homes near the 10 freeway to the newer subdivisions climbing the south hills. What makes our Kwikset work here different is simple: we diagnose the specific generation of lock on your door, not just the type. Fontana’s split housing stock means we see everything from seized 1960s Tustin knobsets to SmartCode deadbolts that quit after one too many 105°F summers. Call (855) 791-2710 and we’ll tell you exactly what’s wrong and what it’ll take to fix, before anyone gets dispatched.
Why Fontana Residents Choose Us for Kwikset Service
Kwikset has been on American doors since 1946, and Fontana’s housing boom from the 1950s through the 1970s put Kwikset hardware on a huge share of those original doors. That means our techs have worked on every era of Kwikset product, worn 400 Series knobsets in 92335, mid-line 600 Series levers in 92336, and current SmartCode electronic deadbolts in the 92337 subdivisions. We don’t guess at the generation. We know what came on the door when the house was built and what’s been retrofitted since.
We’re an independent locksmith shop. We are not affiliated with, authorized by, or endorsed by Kwikset. That independence is exactly why we can be straight with you about when a Kwikset lock deserves repair versus replacement. Noel Tarkanian, our owner and lead technician, grew up around pin-tumbler cylinders and trained through the locksmithing and security technology program at Glendale Community College before spending years on residential and commercial work. He’d tell you the right hardware, fitted right, that’s all security actually is. And he’d tell you when a builder-grade knob has had a full life and isn’t worth another rekey.
Styles & brands we work with
Common Kwikset Locksmith Problems We Solve in Fontana
These are the calls we run most often in Fontana. Each one ties back to the way this city’s climate and housing stock treat lock hardware over time.
- Seized or spinning 400/600 Series knobsets. Decade after decade of dry heat dries out the lubricant inside cylinder housings, and the zinc internals in older 400 Series knobs corrode until the key stops turning or the knob spins without engaging. We see this constantly in 1950s and 1960s homes in 92335 and 92336.
- SmartCode keypads that stop accepting codes or eat batteries. Full-sun western exposures along Fontana’s 100°F+ summer afternoons cook the circuit boards and solder joints in SmartCode 913 and 916 deadbolts. When a keypad stops responding in August, it’s usually heat fatigue, not a programming glitch.
- Kevo Bluetooth modules and motorized deadbolts that fail to pair or throw the bolt fully. In 92337 stucco homes, door slabs warp slightly in sustained heat, shifting the strike alignment just enough that the motorized deadbolt can’t complete its throw. The lock isn’t broken. The door moved.
- Deadbolts that drag or won’t latch after Santa Ana wind events. Wind funneling through the Cajon Pass torques doors and rattles hardware loose. Strike plates pull out of the jamb, deadbolt throws go off-axis, and suddenly a lock that’s worked for twenty years won’t latch at all.
- Worn Tustin and Cove builder-grade knobsets. These original tract-home locks were installed by the thousands in Fontana between the 1950s and 1970s. They were entry-level hardware then, and after fifty or sixty years of use, the cylinders are often too worn to rekey meaningfully.
Kwikset Service in Fontana: What Local Conditions Mean for Your Equipment
There’s a specific Fontana reality that shapes Kwikset work here more than almost anything: the Santa Ana winds. Those winds funnel through the Cajon Pass and hit Fontana harder than most neighboring cities. When wind torques a door for hours, the strike plate screws back out of the jamb, the deadbolt throw loses its alignment, and the door itself can shift enough that the latch no longer reaches the strike. In a 1960s tract home off Sierra Avenue in 92335, our tech answered a call about a Kwikset 400 Series knob that had seized and a deadbolt that wouldn’t latch after a wind event. We freed and rekeyed the knobset to a fresh key, then re-secured the strike plate and re-aligned the deadbolt throw so both worked smoothly. The homeowner kept the original hardware and only paid for a rekey and adjustment.
What does this mean for Kwikset owners specifically? Kwikset’s builder-grade hardware from the mid-century era uses shorter screws and thinner strike plates than what we’d install today. Those original plates were never designed for wind loads like Fontana’s. A lock that works perfectly in a shielded neighborhood in Glendale or after a Kwikset repair in Bloomington will rattle loose here within a few wind seasons. That’s why when we service Kwikset deadbolts in Fontana, we check the strike plate and screw length as part of the job, not as an upsell.
Kwikset Models & Products We Service in Fontana
We service the full Kwikset line that’s actually installed across Fontana’s housing stock. That covers SmartCode 913 and 916 electronic deadbolts, Kevo first and second gen Bluetooth locks, 400 Series and 600 Series Signature knob and lever sets, and the original Tustin and Cove builder-grade knobsets that came on mid-century tract homes. We use genuine Kwikset replacement cylinders, latches, and smart-lock modules where they keep a lock reliable. For aftermarket parts, we only stock hardware that matches or beats OEM durability. On older builder-grade knobsets, we’ll tell you honestly when a clean rekey or cylinder swap gets you another decade versus when a full deadbolt upgrade is the better spend for Kwikset sales & service.
Kwikset Service Pricing in Fontana
Kwikset service in Fontana runs on honest, quoted-in-advance pricing. A standard rekey of a Kwikset knob or deadbolt cylinder typically runs $25-$45 per cylinder, plus the service call, which in Fontana is usually $35-$65. Full replacement of a builder-grade Kwikset knobset with new hardware typically lands between $85 and $165 depending on the model and finish. SmartCode and Kevo installations run higher because they involve programming and app setup, and we quote those per job based on the lock and door configuration.
What drives the cost in Fontana? The age and condition of the existing hardware, whether the door and strike alignment need correction after wind or heat movement, and which generation of SmartCode or Kevo lock you’re dealing with. When you call, we give you a firm price before dispatch, and that’s the price on the invoice. No call-out surcharge added on arrival. Call (855) 791-2710 for a free phone estimate. We’ll ask a few questions about your lock and door, and you’ll know the number before we roll a van.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well, just as we know Kwikset in Rialto. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Fontana
Most likely yes. Fontana’s sustained 100°F+ temperatures, especially on full-sun western exposures, fatigue the solder joints and circuit boards inside SmartCode 913 and 916 keypads. The keypad stops accepting codes or the deadbolt motor becomes sluggish. We replace the failed module with a genuine Kwikset part rather than patching a heat-damaged board. Call (855) 791-2710 and we can confirm it in person.
The wind coming through the Cajon Pass torques the door and pulls the strike plate screws loose. Once the plate shifts, the deadbolt throw is off-axis and the latch won’t seat. We re-secure the plate with longer screws, re-align the throw, and the lock works smoothly again. It’s an alignment fix, not a lock replacement. Call us for a quote.
It depends on the condition of the cylinder. If the cylinder walls are intact and the plug turns smoothly after cleaning and lubrication, a rekey makes sense and costs far less than replacement. If the zinc internals have corroded to the point where the key binds or the knob spins without engaging, you’re better off putting that money toward a new deadbolt with a modern strikeset. We’ll tell you which one applies before we start.
Yes. We install both Kevo and SmartCode systems across the 92337 subdivisions and Kwikset in Glen Avon, including app pairing and programming. In newer construction the doors tend to be more stable, but those homes still see heat-driven strike alignment shifts within a few years, and we factor that into the install. We quote the full job by phone before scheduling.
Usually both. The dry heat dries out the internal lubricant in the cylinder, and the door jamb swells and shrinks with seasonal movement, changing the pressure on the latch. We clean and lubricate the cylinder with a dry-film lubricant that holds up in Fontana’s climate, then check the strike alignment. If the cylinder is too worn, we rekey or swap it. Call (855) 791-2710 for an exact quote. Estimates are free.
Service Areas Near Fontana
We serve all of Fontana’s ZIP codes: 92334, 92335, 92336, and 92337. Our Fontana service area also extends to nearby communities. For Kwikset owners east of the pass, we offer Kwikset service in Laguna Woods and Kwikset service in Lake Forest for the same hardware lines.
Book Your Kwikset Service in Fontana Today
Whether it’s a rekey on a 1960s Tustin knobset in 92335 or a SmartCode install in 92337, we’ll give you a firm quote before we dispatch, and that’s the number on the invoice. Call (855) 791-2710 today. Same-day service is available for most Kwikset repairs and rekeys across Fontana and Kwikset in Pedley.
Written by Noel Tarkanian, Owner and Lead Technician at Glendale Lock & Key, serving Fontana and the Inland Empire.