Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Montclair, CA | Glendale Lock & Key
We provide independent Schlage locksmith service across Montclair, covering everything from re-keying original builder-grade brass knobs on 1960s tract homes to installing current B-Series deadbolts and BE-Series keypad locks. What makes our Schlage work different here is simple: most of Montclair’s housing stock predates modern door framing, so we spend a lot of time correcting deadbolt alignment on jambs that inland heat has warped out of square. If your Schlage lock binds in summer, misaligns seasonally, or won’t re-key cleanly, call (855) 791-2710 and we’ll tell you what’s actually going on.
We’re an independent shop. We are not authorized, sponsored, or endorsed by Schlage. Our expertise comes from working on this hardware every week across Montclair’s older neighborhoods, not from a manufacturer program. That independence means we recommend what fits the door and the budget, whether that’s a genuine OEM Schlage cylinder rebuild or an honest conversation about replacing a fatigued brass knob that’s had a full life.
Why Montclair Residents Choose Us for Schlage Service
Schlage is one of eight lock brands we work on routinely, alongside Kwikset, Medeco, Yale, Baldwin, Mul-T-Lock, Sargent, and Abloy. That matters because a technician who only touches Schlage-day-in and day-out develops blind spots. We see how Schlage hardware behaves relative to everything else on the market, and we know exactly which failures are the lock’s fault and which are the door’s. Around Montclair, it’s usually the door.
Noel Tarkanian, our owner and lead technician, trained through the locksmithing and security technology coursework at Glendale Community College and has spent years on residential and commercial work across the broader Inland Empire corridor. He’s the one who’ll tell you why your Schlage B60N is the right call for a wood-frame door and why a Grade 3 knob is not. He also handles Schlage in Claremont and nearby communities. He grew up watching his uncle rekey apartment units in Glendale, fascinated by the mechanical logic inside a pin-tumbler cylinder, and that methodical diagnostic approach still drives how we work today. When a Montclair homeowner calls about a Schlage lock that only fails in August, we don’t replace the lock first and ask questions later. We find the cause.
We stock genuine Schlage OEM cylinders, knobs, and deadbolt assemblies for direct swaps, along with quality aftermarket strikes and reinforcement plates where they outperform the original builder part. That means faster turnaround for Montclair service calls because we’re not waiting on a parts shipment. For more on our full range of Schlage sales & service, see how we handle everything from keypad retrofits to high-security rekeys.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Montclair
- Builder-grade F-Series knobs worn out from the 1950s-70s tract buildout. The original brass F51 and F10 knobs still on many Montclair homes fatigue internally after decades of use. The cylinder spins loosely, keys feel sloppy, and re-keys don’t hold tolerances the way they should. We can re-key when the housing is solid, but we’ll tell you plainly when replacement is the smarter spend.
- B-Series deadbolts that bind every summer. Montclair’s inland heat dries out and warps wood doors and jambs. A Schlage B60 that latched perfectly in January can drag hard in July because the bolt no longer seats cleanly against the strike. We re-align the strike, adjust the deadbolt throw, and often add a reinforcement plate so the bolt seats through the hot months.
- Seasonal strike plate misalignment on older wood-frame doors. Doors in Montclair’s postwar tracts have baked in six-plus decades of heat and settled out of square. The lock itself may be fine. The strike is the problem. A routine re-key call often becomes a strike adjustment and jamb reinforcement job, which we handle as part of the same visit.
- Exterior Schlage locks and gate hardware pitted by dust and dry air. Winter Santa Ana-driven dust accelerates wear on exposed locks near Montclair’s freeway corridors. Keyways get stiff, thumbturns seize, and cylinders accumulate grit that makes insertion rough. We clean, lubricate with the right product, and replace cylinders when corrosion has gone too far.
- Rental re-keys between tenants. Montclair’s renting population means repeated re-key demand. Landlords want the Schlage hardware kept, not replaced, and we re-key to new keying while preserving the existing knob or deadbolt. It’s faster and cheaper than swapping hardware on every turnover.
Schlage Service in Montclair: What Local Conditions Mean for Your Equipment
Here’s the thing about Montclair locksmith work that a page about, say, Irvine or Rancho Cucamonga wouldn’t tell you: in the older postwar tracts of 91763, the doors themselves are the recurring problem. These are 1950s-1970s single-family ranches and small stucco bungalows built with wood-frame doors that have spent fifty to seventy years expanding and contracting through inland heat cycles. The door no longer hangs square. The jamb has shifted. The Schlage deadbolt you installed ten years ago hasn’t failed, but its strike plate is now a quarter-inch out of line with the bolt, which means it binds in summer and sometimes won’t latch at all unless you shoulder the door closed.
That’s the call we get constantly from Montclair homeowners. They assume the lock is bad because it misbehaves seasonally. We find the jamb has warped. A coastal or newer-development locksmith rarely deals with this because their housing stock hasn’t been baking in San Bernardino County heat since the Eisenhower administration. We were called to a 1960s ranch home in the 91763 tract off the 10/60 interchange where the owner’s Schlage B60 deadbolt had stopped latching each summer. Our tech found the wood jamb had warped and the original short strike no longer lined up, so we re-keyed the Schlage cylinder, reset the strike, and added a reinforcement plate. The bolt now seats cleanly through the hot months. That’s typical Montclair work.
The right hardware, fitted right, that’s all security actually is.
Schlage Models & Products We Service in Montclair
We service the full residential Schlage lineup a Montclair homeowner is likely to encounter. That covers the B-Series single-cylinder deadbolts (B60, B62), the F-Series knob and lever sets (F51, F10), the Camelot and Plymouth handle-set collections, and the BE-Series electronic keypad deadbolts including the BE365 and BE469. Older homes in 91763 often still carry original builder-grade brass knobs from the tract buildout, and those are frequently the ones we’re re-keying or replacing.
Parts matter with Schlage. We stock genuine OEM Schlage cylinders and deadbolt assemblies for direct swaps because aftermarket internals simply don’t hold the same tolerances. For strikes and reinforcement plates, we use quality aftermarket hardware where it actually improves on the original builder part. That combination keeps Schlage locks functioning as-designed while making the surrounding door assembly stronger than it was when the house was new. If you’re in a nearby community, we also handle Montclair service area calls across the surrounding Inland Empire region.
Schlage Service Pricing in Montclair
Schlage re-key service in Montclair typically runs between $75 and $150 depending on how many cylinders are involved and whether we’re resetting strike alignment at the same time. Basic Schlage deadbolt installation with a new B60 single-cylinder unit usually lands around $120 to $220 including the hardware, while a BE-Series keypad deadbolt installation runs $180 to $300 with the lock included. Full re-keys on a Montclair rental with multiple entry points cost more, and we’ll quote the full number before anyone is dispatched. The price we quote on the phone is the price on the invoice. No call-out surcharge added on arrival.
Lock re-key and cylinder rebuilds for fatigued Schlage brass knobs vary by condition. We’ll tell you honestly when re-keying is still worth it and when a replacement knob is the better long-term call for a Montclair door that’s already fighting the jamb. Call (855) 791-2710 for a free estimate on any Schlage work. We’ll give you exact numbers before we roll a truck.
Serving Montclair, CA — Our Local Coverage Area
We’re based in the Montclair area and know this community well, and we also provide Schlage service in Ontario. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Montclair
Usually not. Montclair’s inland summer heat dries and warps wood doors and jambs, which shifts the strike plate out of alignment with the deadbolt throw. The lock mechanism itself is often sound. We fix this by resetting the strike, adjusting the deadbolt alignment, and adding a reinforcement plate if the jamb has softened. We also offer Schlage service in Upland. Call (855) 791-2710 and we’ll diagnose it over the phone before scheduling anything.
Often yes, but it depends on the cylinder’s condition. Many original F-Series brass knobs from the 1950s-70s tract buildout have fatigued internally and won’t hold a clean re-key. We’ll inspect the cylinder and tell you honestly whether re-keying is worth it or whether replacing the knob with a current Schlage model is the better long-term value for a Montclair door that’s already fighting its jamb.
We do. Schlage BE-Series keypad deadbolts like the BE365 and BE469 can be fitted on most Montclair wood-frame doors, but the door needs to sit reasonably square or the keypad bolt will bind the same way a mechanical deadbolt would. We may need to adjust the strike and strengthen the jamb first. We’ll tell you what’s required before quoting the job. We also provide Schlage repair in La Verne. Call (855) 791-2710 for specifics on your door.
For Montclair rental properties, we usually recommend keeping the existing Schlage hardware and re-keying to new keys between tenants unless the knobs or deadbolts are already worn. If you’re replacing, a B60 single-cylinder deadbolt paired with an F-Series entry knob is solid, reasonably priced, and easy to re-key for the next turnover. We can quote both the re-key and the replacement path so you can compare.
No. Glendale Lock & Key is an independent locksmith that works on Schlage hardware across Montclair. We are not authorized, sponsored, or endorsed by Schlage. That independence means we recommend what actually fits your door and your budget, not what a manufacturer program pushes. We do stock genuine OEM Schlage parts because aftermarket internals don’t hold the same tolerances, so you get OEM quality without the dealership markup. For Montclair homeowners, that usually means a faster, more straightforward service call.
Service Areas Near Montclair
Along with Montclair, we regularly work Schlage hardware in the broader Inland Empire corridor and the San Gabriel Valley. That includes surrounding communities like Ontario, Pomona, Chino, Claremont, and Upland. If you’re just outside Montclair, we handle Schlage service in Los Serranos and Schlage service in Chino as well.
Book Your Schlage Service in Montclair Today
Need a Schlage re-key, deadbolt install, or jamb realignment in Montclair? Call (855) 791-2710 and we’ll talk through what you’re seeing with the lock, quote the work up front, and get you scheduled. Same-day service is available for many Montclair calls.
Written by Noel Tarkanian, Owner at Glendale Lock & Key, serving Montclair and the surrounding Inland Empire with independent Schlage locksmith service.